
Phones answered 7am to 5pm
Plumbing project works in Deakin: approve the fixture schedule first Plumbing project works, planned.
We plan the pipes with you before the walls close and the tiles go on.
- Call back in 5 minutes
- Same day visits
- 10% off when you book online
- Rated 5.0 on Google
- Licensed in the ACT and NSW
- Homes, rentals and businesses
★★★★★
“Friendly … and respectful of making a worksite in your home”Sue M · Google review★★★★★
“Arrived on time … and left everything clean and tidy”Talia · Google review★★★★★
“Arrived when they said they would”Alessia · Google review★★★★★
“Quick to respond, efficient … reasonably priced”Christine · Google review
Still putting up with these?
You want the sink on the other side of the kitchen.
We map out where the new pipes will run.
You're not sure the old pipes suit the new layout.
We check what can stay and what needs to change.
The tiler is booked but the pipes aren't in yet.
We set our dates around the rest of the build.
Plumbing project works in Deakin
Deakin renovation plumbing: settle fixture choices, connection requirements and approval points before the work is enclosed by finishes.
WaterMark products on a Deakin fixture schedule
Deakin was gazetted on 20 September 1928, and at the 2021 Census its homes were mainly separate houses, with 18.0% townhouses or semi-detached homes and an average of 2.4 people per household. A renovation in one of them starts with the fixture schedule, and every scheduled product on it has to pass one national test. Under the national WaterMark scheme, certification is compulsory for specified plumbing and drainage products, and a scheduled product that lacks it can’t be installed by a licensed plumber. Confirming certification for each item before ordering keeps the Deakin schedule buildable.
Deakin renovations: minor work or a notified job?
Replacements and repairs up to a value of $1000 count as minor plumbing or drainage work in the ACT and sit outside plan approval, though a licensed plumber and drainer still completes them with a Hydraulic certificate of compliance. Bigger Deakin renovations follow a notice trail: Access Canberra hears from the plumber at the start, at the point the work can be inspected, and at completion. Every drain gets an inspection when the full drainage system has been laid, so new drainage is checked before tiles and cabinetry cover it.
Here's how it works.

Give us a call.
Call or send the form. Share your plans and what's moving.
Step 1: Give us a call.
Define retained and changed pipework
Provide the proposed layout and identify which fixtures move, remain or are added. Existing plans can inform discussion but current connections and access need assessment. Do not assume a new fixture can use an old connection without checking suitability.

We come to you.
We look at the site and the pipes that are there now.
Step 2: We come to you.
When this service is useful
Oroflow undertakes plumbing project works for residential and commercial properties. A renovation or new layout can involve water supply, waste connections, underground drainage and hot water changes. Early discussion helps define dependencies before finishes are completed.
Sequence trades and approvals
Discuss who coordinates other trades, permissions, rough-in work, checking connections and final installation. Ask which surfaces may need opening and who reinstates them. A detailed scope allows meaningful comparison of quotes.

We install it.
The pipes go in and get checked before the finishes go on.
Step 3: We install it.
Notices, referrals and inspections in Canberra
ACT plumbers and drainers must notify Access Canberra before starting work, when it is ready for inspection and when it is complete. Inspections are carried out by Access Canberra rather than the building certifier. Once a drainage system is fully in place, all drains are inspected, while other plumbing is checked through targeted audits. Icon Water must approve plans before certification when a project increases water demand or sewer load. The same applies to non-domestic waste, a changed or removed connection point, or a new fire service. Certified plans must show connection points and the location and depths of sewer, water and stormwater connections. Build these notification and inspection points into the programme from the start.
Project stages in Bungendore and Braidwood
In regional NSW, plumbers and drainers submit a Notice of Work to the local plumbing regulator before work begins. For Bungendore and Braidwood, that regulator is Queanbeyan-Palerang Regional Council. Inspections are usually booked at set points. Drainage is checked after it is laid but before backfilling. Water supply work is checked before walls are sheeted. A final inspection happens when all work is finished, before occupation. At the end, the person who arranged the work receives a Certificate of Compliance and a Sewer Service Diagram. The diagram shows where the private sewer pipes run, and a copy also goes to the regulator. Sequence the plasterer and landscaper around those inspection points.

Easy payment.
We tell you how to pay before we start, so there's no awkward moment at the end.
New rooms and new layouts, piped right.

Bathrooms and ensuites
New or moved showers, toilets and basins.
- Moved showers
- New toilets
- Double vanities
- Ensuite add-ons

Kitchens and laundries
Sinks, dishwashers and laundry tubs in new spots.
- Moved kitchen sinks
- Island benches
- Laundry tubs
- Hot water to new spots

Extensions and new layouts
Water and waste for added rooms, homes and shops.
- Room extensions
- Underground drainage
- Shop and office layouts
- Inspection stages planned
Other services
Common questions
Straight answers to what people ask us most.
Can't see your question? Call 0403 095 102
Where does the overflow relief gully go if a Deakin bathroom moves?
It must be 150 mm below the lowest internal fixture outlet or floor waste, so sewage escapes outside rather than into the home if the sewer blocks downstream. A new bathroom position can change which fixture is lowest, so gully height belongs on the schedule.
How do I get the drainage plan for my Deakin house?
Approved plans are held by the ACT Government and found through Access Canberra’s plumbing tie search. Modifying a residential sanitary drainage system means buying the property’s plan, and the plan image is supplied within 48 hours of application and payment.
Does a plumbing quote cover other trade work automatically?
No. Ask which connected tasks are included and who coordinates anything excluded, especially electrical work and opening or reinstating finishes.
Why is hot water in my Deakin home stored hotter than it comes out of the shower?
Water is stored at 60°C to avoid the growth of Legionella bacteria, while delivery at bathroom fixtures is limited to 50°C. A tempering valve or thermostatic mixing valve brings the temperature down before it reaches the outlet.
Does the stricter 45°C limit apply to a Deakin house?
The 45°C limit covers aged care residential areas, health-care patient areas, early childhood centres, schools used by children and designated accessible facilities. A private home in Deakin falls under the general 50°C limit at bathroom outlets.
Do I need a Before You Dig enquiry for a renovation trench?
Before You Dig Australia says anyone working around underground infrastructure should lodge a free enquiry first. One request reaches all registered asset owners at the site. The plans are indicative only, they expire, and receiving them is not approval to dig.
Where do I find the drainage plan for my Canberra home?
Approved sanitary drainage plans are ACT Government property, and you can locate yours with the plumbing tie search on Access Canberra. If you plan to modify a residential sanitary drainage system, you need to buy the plan. The image is supplied within 48 hours of application and payment.
Can I supply my own tapware and fittings for a renovation?
WaterMark is a mandatory national certification scheme for specified plumbing and drainage products. A licensed plumber is not permitted to install a scheduled product that is not WaterMark certified. Check for the mark before you buy, particularly online.
Can I send you my plans first?
Yes. Send the layout and mark what moves, stays or gets added. We still check the pipes on site before the work is set.
Can you use my old pipes for the new layout?
Sometimes. We check each connection first, rather than assume an old one suits a new tap or toilet.
Do you do renovations for businesses too?
Yes. We do project works for homes and commercial properties.
Can I send you my plans first?
Yes. Send the layout and mark what moves, stays or gets added. We still check the pipes on site before the work is set.
Can you use my old pipes for the new layout?
Sometimes. We check each connection first, rather than assume an old one suits a new tap or toilet.
Who lets the inspectors know?
In the ACT, the plumber tells Access Canberra when work starts, when it's ready to inspect and when it's done. In Bungendore and Braidwood, a Notice of Work goes to the council first.
Do you do renovations for businesses too?
Yes. We do project works for homes and commercial properties.
Do you come out to Bungendore and Braidwood?
Yes. We cover Canberra and about 100 km around it.
Are you licensed?
Yes. ACT 20241513 and NSW 498011C, and fully insured.
Tell us what's wrong. We'll take it from there.
Send us a few details and we'll take it from there.
- Call us0403 095 102
- Email usoffice@oroflowplumbing.com





