
Phones answered 7am to 5pm
Hot water replacement in Phillip: define essential-use changeover tasks Hot water system replacement.
We take the old one out and fit one that suits how your house uses hot water.
- Call back in 5 minutes
- Same day visits
- 10% off when you book online
- Rated 5.0 on Google
- Licensed in the ACT and NSW
- Homes, rentals and businesses
★★★★★
“Friendly … and respectful of making a worksite in your home”Sue M · Google review★★★★★
“Arrived on time … and left everything clean and tidy”Talia · Google review★★★★★
“Arrived when they said they would”Alessia · Google review★★★★★
“Quick to respond, efficient … reasonably priced”Christine · Google review
Still putting up with these?
The old tank is rusty and leaking at the base.
We take it out and fit a new one.
It's been patched up again and again.
We tell you when a new one makes more sense.
The old unit sits in a tight spot.
We plan how it comes out before the day.
Hot water system replacement in Phillip
Phillip unit replacements: identify affected hot water facilities and separate unit changeover from wider premises maintenance.
Hot water as an essential service in Phillip rentals
At the 2021 Census, 49.4% of Phillip’s occupied private dwellings were rented and 67.0% were flats or apartments. When the hot water in one of those flats stops, ACT tenancy terms treat it as urgent: the breakdown of any service essential for hot water, cooking, heating, cooling or laundering sits on the urgent list with a failure of gas, electricity or water supply. The tenant reports it as soon as practicable, and a tenant who arranges the repair personally has to follow the procedure strictly or carry the cost themselves.
Scald risk and stored water in Phillip apartments
Phillip households averaged 1.9 people at the 2021 Census, and every one of them uses the same bathroom outlets. The Australian Building Codes Board cites research showing the time to a scald falls from 5 minutes at 50°C to 5 seconds at 60°C. That is why stored and delivered water sit at different temperatures: storage is kept at 60°C to avoid Legionella growth, while bathroom outlets in homes are held to 50°C. In an apartment changeover, the tempering valve or thermostatic mixing valve belongs on the task list beside the unit itself.
Here's how it works.

Give us a call.
Call or send the form. A photo of the label on your old unit helps.
Step 1: Give us a call.
When this service is useful
A full replacement may be appropriate for a deteriorated, leaking or unsuitable unit. The decision should consider the current fault, realistic repair options and demand at the property. Oroflow supplies and replaces electric and continuous-flow hot water systems.
Compare like-for-like quotes
Ask what supply, installation and removal include and what needs inspection first. Timing and availability must be confirmed for the actual job. No fixed replacement price, brand availability or blanket warranty length is advertised.

We come to you.
We check the old unit, the space and how it comes out.
Step 2: We come to you.
Specify the complete changeover
Discuss system selection, safe access, removal of the existing unit, plumbing connections and any other trade coordination. Explain household or commercial use and simultaneous demand. Do not assume the old unit size remains the best fit.
Replacing a gas unit in Canberra
A Canberra home with a gas meter already installed can keep using its gas connection. The ban that started on 8 December 2023 stops new connections, not existing ones. So a failed gas unit raises a real choice rather than forcing one. The ACT Government says hot water heat pumps use 55 to 80% less energy than standard electric storage or gas systems. It also says they work well in the ACT’s cold climate. Its estimate is that moving from gas hot water to an electric heat pump can cut around 10 tonnes of emissions over the heat pump’s life. If you plan to remove the gas meter later, remember it cannot be reconnected once abolished.

We swap it.
The old unit goes out, the new one goes in and gets tested.
Step 3: We swap it.
Changeover paperwork in Bungendore and Braidwood
Swapping out an existing hot water system is classed as minor plumbing work in NSW. A Notice of Work does not need to be lodged before it starts. The Combined Notice of Work and Certificate of Compliance form can be used instead. Whoever arranged the job should receive a copy of the Certificate of Compliance at the end. Queanbeyan-Palerang Regional Council holds the local plumbing regulator role here, under delegation from Building Commission NSW. Council also runs the local water network, and Bungendore and Braidwood each treat their own water. File that certificate with your property records.

Easy payment.
We tell you how to pay before we start, so there's no awkward moment at the end.
Out with the old. In with the right one.

Like-for-like swaps
The same type of unit, new and fitted.
- Electric tank for tank
- Wall unit for wall unit
- Old unit taken away
- Tested before we go

A size that fits now
A unit sized for the house you have today.
- Bigger families
- Fewer people at home
- Busy morning showers
- A change of type

Homes, rentals and shops
We swap the old unit, wherever it is.
- Family homes
- Rental properties
- Cafes and shops
- Units and townhouses
Other services
Common questions
Straight answers to what people ask us most.
Can't see your question? Call 0403 095 102
How much can a Phillip tenant spend on an urgent hot water repair?
When the lessor can’t be contacted or doesn’t act within a reasonable time, an ACT tenant may arrange urgent repairs up to 5% of the property’s rent over a year. The job goes to the lessor’s nominated qualified tradesperson where one is named.
What standards does a Phillip rental’s plumbing have to meet?
ACT lessors must ensure rental premises comply with the minimum housing standards that apply, and a regulation may set those standards for matters including sanitation and amenity. Repairs that aren’t urgent are due within 4 weeks of the lessor being notified, unless otherwise agreed.
What should a business list first in a plumbing enquiry?
Name failed essential fixtures, immediate risks and remaining facilities, followed by approval and access arrangements. Keep optional improvements separate.
Who inspects plumbing work in a Phillip apartment building?
In the ACT that is Access Canberra’s role, not the building certifier’s. ACT plumbers must lodge a plumbing and drainage start of work notice before beginning, and plan approval is required for all commercial plumbing and drainage work, which includes multi-unit housing.
Does a cafe or salon in the Woden Town Centre need Icon Water approval?
If it discharges liquid trade waste, yes. Icon Water lists restaurants, hairdressers, dentists and supermarkets among the businesses that generate it, and approval is needed under a separate negotiated contract. A cafe that starts serving hot food must have an existing approval varied.
I hold a concession card in Canberra. Is there help replacing my hot water system?
The ACT Home Energy Support Program offers eligible concession card owner-occupiers a rebate of 50% of supply and installation cost, up to $2,500, for a heat pump or evacuated tube solar system. A zero-interest loan of up to $10,000 is also available, subject to eligibility conditions. Do not accept a quote until the ACT Government has pre-approved your application.
How long will gas hot water be supported in Canberra?
The ACT plans to stop using fossil fuel gas by 2045. The ACT Government says the gas network may begin shutting down from the mid-2030s onwards. Until then, homes with an existing meter can keep using their connection.
Will the new unit be the same size as the old one?
Not always. We size it to how your house uses hot water now. The old unit is a starting point, not the answer.
Do you take the old unit away?
Yes. Taking the old unit out is part of the changeover, and it's listed in what we quote.
Do you replace units in rentals?
Yes. We quote for the owner or the property manager and sort out access with them.
How do I compare your quote with others?
Ours lists the unit, the fitting, taking the old one out and anything we still need to check. Line those up against the others.
Will the new unit be the same size as the old one?
Not always. We size it to how your house uses hot water now. The old unit is a starting point, not the answer.
Do you take the old unit away?
Yes. Taking the old unit out is part of the changeover, and it's listed in what we quote.
Do you replace units in rentals?
Yes. We quote for the owner or the property manager and sort out access with them.
How do I compare your quote with others?
Ours lists the unit, the fitting, taking the old one out and anything we still need to check. Line those up against the others.
Do you come out to Bungendore and Braidwood?
Yes. We cover Canberra and about 100 km around it.
Are you licensed?
Yes. ACT 20241513 and NSW 498011C, and fully insured.
Tell us what's wrong. We'll take it from there.
Send us a few details and we'll take it from there.
- Call us0403 095 102
- Email usoffice@oroflowplumbing.com





