Skip to content

10% off online bookings and pensioners

Call back in 5 minutes

Same day visits

Illustrative: a plumber cutting a waste pipe to length at a new shower spot in a stripped bathroom

Phones answered 7am to 5pmCanberra

Plumbing project works in Phillip: define tenant and owner interfaces Plumbing project works, planned.

We plan the pipes with you before the walls close and the tiles go on.

  • Call back in 5 minutes
  • Same day visits
  • 10% off when you book online
  • Rated 5.0 on Google
  • Licensed in the ACT and NSW
  • Homes, rentals and businesses
  • ★★★★★

    “Friendly … and respectful of making a worksite in your home”Sue M · Google review
  • ★★★★★

    “Arrived on time … and left everything clean and tidy”Talia · Google review
  • ★★★★★

    “Arrived when they said they would”Alessia · Google review
  • ★★★★★

    “Quick to respond, efficient … reasonably priced”Christine · Google review

Still putting up with these?

  • You want the sink on the other side of the kitchen.

    We map out where the new pipes will run.

  • You're not sure the old pipes suit the new layout.

    We check what can stay and what needs to change.

  • The tiler is booked but the pipes aren't in yet.

    We set our dates around the rest of the build.

  • You're adding a second toilet or an ensuite.

    We plan where the new pipes run and connect.

  • You're moving the laundry into the garage.

    We run new water and waste lines to the new spot.

  • The new kitchen needs hot water in a new spot.

    We plan the hot water run with the rest.

Plumbing project works in Phillip

Phillip commercial fit-out plumbing: separate retained services from changed connections, landlord approvals and other-trade responsibilities.

Grease traps in a Woden Town Centre food fit-out

Phillip takes in the Woden Town Centre, with the Westfield Woden shopping centre and a bus interchange, so plumbing project work here includes retail fit-outs. Where a new tenancy will prepare, cook or serve hot food on site, Icon Water requires a passive grease trap to receive drainage from food preparation, cooking, serving and washing up. Glass washer drainage must not pass through it. Because the trap serves the tenant but connects into the building’s drainage, its position and connection are worth settling between landlord and tenant before the fit-out drawings are finalised.

When a Phillip fit-out needs Icon Water to approve the plans

Icon Water must approve plumbing plans before certification where work involves non-domestic waste, increased water demand or sewer load, a changed or removed connection point, or a new fire service. In a Phillip shopfront or office conversion, any of those changes brings Icon Water into the approval chain alongside the landlord. Marking which existing services stay and which connections change shows clearly whether the referral applies, and keeps the tenant’s scope separate from the base building and from other trades working in the same space.

Here's how it works.

  1. Illustrative: a plumber on the phone leaning on the open side door of his van in a loading dock

    Give us a call.

    Call or send the form. Share your plans and what's moving.

    Step 1: Give us a call.

    Define retained and changed pipework

    Provide the proposed layout and identify which fixtures move, remain or are added. Existing plans can inform discussion but current connections and access need assessment. Do not assume a new fixture can use an old connection without checking suitability.

  2. Illustrative: a plumber carrying his toolbox up the front steps to a small building's glass entry

    We come to you.

    We look at the site and the pipes that are there now.

    Step 2: We come to you.

    When this service is useful

    Oroflow undertakes plumbing project works for residential and commercial properties. A renovation or new layout can involve water supply, waste connections, underground drainage and hot water changes. Early discussion helps define dependencies before finishes are completed.

    Sequence trades and approvals

    Discuss who coordinates other trades, permissions, rough-in work, checking connections and final installation. Ask which surfaces may need opening and who reinstates them. A detailed scope allows meaningful comparison of quotes.

  3. Illustrative: a pressure gauge fitted to a capped water pipe in an open wall during a test

    We install it.

    The pipes go in and get checked before the finishes go on.

    Step 3: We install it.

    Notices, referrals and inspections in Canberra

    ACT plumbers and drainers must notify Access Canberra before starting work, when it is ready for inspection and when it is complete. Inspections are carried out by Access Canberra rather than the building certifier. Once a drainage system is fully in place, all drains are inspected, while other plumbing is checked through targeted audits. Icon Water must approve plans before certification when a project increases water demand or sewer load. The same applies to non-domestic waste, a changed or removed connection point, or a new fire service. Certified plans must show connection points and the location and depths of sewer, water and stormwater connections. Build these notification and inspection points into the programme from the start.

    Project stages in Bungendore and Braidwood

    In regional NSW, plumbers and drainers submit a Notice of Work to the local plumbing regulator before work begins. For Bungendore and Braidwood, that regulator is Queanbeyan-Palerang Regional Council. Inspections are usually booked at set points. Drainage is checked after it is laid but before backfilling. Water supply work is checked before walls are sheeted. A final inspection happens when all work is finished, before occupation. At the end, the person who arranged the work receives a Certificate of Compliance and a Sewer Service Diagram. The diagram shows where the private sewer pipes run, and a copy also goes to the regulator. Sequence the plasterer and landscaper around those inspection points.

  4. Illustrative: a yellow bank card tapped on a black card reader on a cafe counter

    Easy payment.

    We tell you how to pay before we start, so there's no awkward moment at the end.

New rooms and new layouts, piped right.

  • Illustrative: a new ensuite mid-build with a shower mixer fitted in a waterproofed wall

    Bathrooms and ensuites

    New or moved showers, toilets and basins.

    • Moved showers
    • New toilets
    • Double vanities
    • Ensuite add-ons
  • Illustrative: hands fitting a new water line where an island sink will go in a stripped kitchen

    Kitchens and laundries

    Sinks, dishwashers and laundry tubs in new spots.

    • Moved kitchen sinks
    • Island benches
    • Laundry tubs
    • Hot water to new spots
  • Illustrative: a plumber laying grey drainage pipe in a trench beside a house extension

    Extensions and new layouts

    Water and waste for added rooms, homes and shops.

    • Room extensions
    • Underground drainage
    • Shop and office layouts
    • Inspection stages planned

Common questions

Straight answers to what people ask us most.

Can't see your question? Call 0403 095 102

How big does a grease trap need to be for a Phillip food outlet?

Icon Water’s minimum grease trap size is 1,000 L. Fast food outlets and large supermarkets need at least 2,000 L, and a single grease trap is capped at 5,000 L, so trap size follows the type of food business.

Is there a fee for trade waste approval on a Phillip fit-out?

Icon Water currently charges no fees to apply for or receive trade waste approval. The maximum turnaround for a low or medium risk application is generally four weeks, or 20 business days, so lodge it well ahead of opening.

What should a business list first in a plumbing enquiry?

Name failed essential fixtures, immediate risks and remaining facilities, followed by approval and access arrangements. Keep optional improvements separate.

Who inspects plumbing work in a Phillip apartment building?

In the ACT that is Access Canberra’s role, not the building certifier’s. ACT plumbers must lodge a plumbing and drainage start of work notice before beginning, and plan approval is required for all commercial plumbing and drainage work, which includes multi-unit housing.

Does a cafe or salon in the Woden Town Centre need Icon Water approval?

If it discharges liquid trade waste, yes. Icon Water lists restaurants, hairdressers, dentists and supermarkets among the businesses that generate it, and approval is needed under a separate negotiated contract. A cafe that starts serving hot food must have an existing approval varied.

Do I need a Before You Dig enquiry for a renovation trench?

Before You Dig Australia says anyone working around underground infrastructure should lodge a free enquiry first. One request reaches all registered asset owners at the site. The plans are indicative only, they expire, and receiving them is not approval to dig.

Where do I find the drainage plan for my Canberra home?

Approved sanitary drainage plans are ACT Government property, and you can locate yours with the plumbing tie search on Access Canberra. If you plan to modify a residential sanitary drainage system, you need to buy the plan. The image is supplied within 48 hours of application and payment.

Can I supply my own tapware and fittings for a renovation?

WaterMark is a mandatory national certification scheme for specified plumbing and drainage products. A licensed plumber is not permitted to install a scheduled product that is not WaterMark certified. Check for the mark before you buy, particularly online.

Can I send you my plans first?

Yes. Send the layout and mark what moves, stays or gets added. We still check the pipes on site before the work is set.

Can you use my old pipes for the new layout?

Sometimes. We check each connection first, rather than assume an old one suits a new tap or toilet.

Do you do renovations for businesses too?

Yes. We do project works for homes and commercial properties.

Can I send you my plans first?

Yes. Send the layout and mark what moves, stays or gets added. We still check the pipes on site before the work is set.

Can you use my old pipes for the new layout?

Sometimes. We check each connection first, rather than assume an old one suits a new tap or toilet.

Who lets the inspectors know?

In the ACT, the plumber tells Access Canberra when work starts, when it's ready to inspect and when it's done. In Bungendore and Braidwood, a Notice of Work goes to the council first.

Do you do renovations for businesses too?

Yes. We do project works for homes and commercial properties.

Do you come out to Bungendore and Braidwood?

Yes. We cover Canberra and about 100 km around it.

Are you licensed?

Yes. ACT 20241513 and NSW 498011C, and fully insured.

Tell us what's wrong. We'll take it from there.

Send us a few details and we'll take it from there.

JAGA Swanson Court, Level 1 Swanson Court, Belconnen ACT, Australia
Free quotesFully licensed & insured

Book here and save 10%. Pensioners save 10% too. One discount per job.

5.0 on Google · ACT 20241513 · NSW 498011C · Fully insured

Hi, I'm Matt. Lorenzo and I read every enquiry ourselves and call you back within 5 minutes, 7am to 5pm.

What happens next

  1. You send us your details.
  2. We call you back within 5 minutes.
  3. We get to you the same day.

Free quote, no obligation. Your details are only used to respond to your enquiry.