
Phones answered 7am to 5pm
Plumbing project works in Turner: hand over between project stages Plumbing project works, planned.
We plan the pipes with you before the walls close and the tiles go on.
- Call back in 5 minutes
- Same day visits
- 10% off when you book online
- Rated 5.0 on Google
- Licensed in the ACT and NSW
- Homes, rentals and businesses
★★★★★
“Friendly … and respectful of making a worksite in your home”Sue M · Google review★★★★★
“Arrived on time … and left everything clean and tidy”Talia · Google review★★★★★
“Arrived when they said they would”Alessia · Google review★★★★★
“Quick to respond, efficient … reasonably priced”Christine · Google review
Still putting up with these?
You want the sink on the other side of the kitchen.
We map out where the new pipes will run.
You're not sure the old pipes suit the new layout.
We check what can stay and what needs to change.
The tiler is booked but the pipes aren't in yet.
We set our dates around the rest of the build.
Plumbing project works in Turner
Turner staged plumbing projects: distinguish temporary use from completed connections and agree each stage’s access, checks and handover.
Plan approval for staged work in Turner unit blocks
Turner had 4,470 residents at the 2021 Census, and only 12.5% of its occupied private dwellings were separate houses, with 13.8% townhouses or semi-detached homes and the remainder flats or apartments. That matters for project plumbing. In the ACT, all housing other than single residential buildings counts as commercial work for plumbing plan approval, so the same plan approval that applies to commercial plumbing and drainage, and to pipework linked to a water service of 50mm or greater, applies to apartment work. A staged project in a Turner apartment building is planned and approved on that basis.
Inspection points between Turner project stages
ACT plumbers and drainers notify Access Canberra before starting work, when work is ready for inspection, and when it is completed. Drains are all inspected once the drainage system is fully in place, while other plumbing work is checked through targeted audits. For a Turner project delivered in stages, each handover can line up with one of those notifications, so the next trade arrives knowing which work has been inspected, which is still open and which connections are temporary.
Here's how it works.

Give us a call.
Call or send the form. Share your plans and what's moving.
Step 1: Give us a call.
Define retained and changed pipework
Provide the proposed layout and identify which fixtures move, remain or are added. Existing plans can inform discussion but current connections and access need assessment. Do not assume a new fixture can use an old connection without checking suitability.

We come to you.
We look at the site and the pipes that are there now.
Step 2: We come to you.
When this service is useful
Oroflow undertakes plumbing project works for residential and commercial properties. A renovation or new layout can involve water supply, waste connections, underground drainage and hot water changes. Early discussion helps define dependencies before finishes are completed.
Sequence trades and approvals
Discuss who coordinates other trades, permissions, rough-in work, checking connections and final installation. Ask which surfaces may need opening and who reinstates them. A detailed scope allows meaningful comparison of quotes.

We install it.
The pipes go in and get checked before the finishes go on.
Step 3: We install it.
Notices, referrals and inspections in Canberra
ACT plumbers and drainers must notify Access Canberra before starting work, when it is ready for inspection and when it is complete. Inspections are carried out by Access Canberra rather than the building certifier. Once a drainage system is fully in place, all drains are inspected, while other plumbing is checked through targeted audits. Icon Water must approve plans before certification when a project increases water demand or sewer load. The same applies to non-domestic waste, a changed or removed connection point, or a new fire service. Certified plans must show connection points and the location and depths of sewer, water and stormwater connections. Build these notification and inspection points into the programme from the start.
Project stages in Bungendore and Braidwood
In regional NSW, plumbers and drainers submit a Notice of Work to the local plumbing regulator before work begins. For Bungendore and Braidwood, that regulator is Queanbeyan-Palerang Regional Council. Inspections are usually booked at set points. Drainage is checked after it is laid but before backfilling. Water supply work is checked before walls are sheeted. A final inspection happens when all work is finished, before occupation. At the end, the person who arranged the work receives a Certificate of Compliance and a Sewer Service Diagram. The diagram shows where the private sewer pipes run, and a copy also goes to the regulator. Sequence the plasterer and landscaper around those inspection points.

Easy payment.
We tell you how to pay before we start, so there's no awkward moment at the end.
New rooms and new layouts, piped right.

Bathrooms and ensuites
New or moved showers, toilets and basins.
- Moved showers
- New toilets
- Double vanities
- Ensuite add-ons

Kitchens and laundries
Sinks, dishwashers and laundry tubs in new spots.
- Moved kitchen sinks
- Island benches
- Laundry tubs
- Hot water to new spots

Extensions and new layouts
Water and waste for added rooms, homes and shops.
- Room extensions
- Underground drainage
- Shop and office layouts
- Inspection stages planned
Other services
Common questions
Straight answers to what people ask us most.
Can't see your question? Call 0403 095 102
Does a plumber on a Turner project need an ACT licence?
Yes. ACT plumbing, drainage and gasfitting work needs a licence under the Construction Occupations (Licensing) Act 2004. Access Canberra’s public registers show a licence’s status, including whether it has expired or been suspended or cancelled.
Does a Turner project that digs near the building need a Before You Dig enquiry?
Before You Dig Australia says anyone intending to work around underground infrastructure should lodge a free enquiry before starting. Receiving every response is only the first step: each asset owner’s directions must be followed before excavation begins.
Can maintenance be combined with a renovation quote?
Yes, but distinguish immediate repairs from future layout changes. Final project scope depends on the selected layout, connections and trade coordination.
How much can a Turner tenant spend on an urgent repair if the lessor doesn’t respond?
Up to 5% of the property’s rent over a year, and only once the lessor cannot be contacted or has failed to fix the problem within a reasonable time. A tenant who does not follow that procedure strictly carries the cost personally.
Is a gas leak in a Turner flat an urgent repair?
Yes. A gas leak is on the ACT urgent repair list with a serious roof leak and a burst water service. A failure of gas, electricity or water supply is also classed as urgent under the standard tenancy terms.
Do I need a Before You Dig enquiry for a renovation trench?
Before You Dig Australia says anyone working around underground infrastructure should lodge a free enquiry first. One request reaches all registered asset owners at the site. The plans are indicative only, they expire, and receiving them is not approval to dig.
Where do I find the drainage plan for my Canberra home?
Approved sanitary drainage plans are ACT Government property, and you can locate yours with the plumbing tie search on Access Canberra. If you plan to modify a residential sanitary drainage system, you need to buy the plan. The image is supplied within 48 hours of application and payment.
Can I supply my own tapware and fittings for a renovation?
WaterMark is a mandatory national certification scheme for specified plumbing and drainage products. A licensed plumber is not permitted to install a scheduled product that is not WaterMark certified. Check for the mark before you buy, particularly online.
Can I send you my plans first?
Yes. Send the layout and mark what moves, stays or gets added. We still check the pipes on site before the work is set.
Can you use my old pipes for the new layout?
Sometimes. We check each connection first, rather than assume an old one suits a new tap or toilet.
Do you do renovations for businesses too?
Yes. We do project works for homes and commercial properties.
Can I send you my plans first?
Yes. Send the layout and mark what moves, stays or gets added. We still check the pipes on site before the work is set.
Can you use my old pipes for the new layout?
Sometimes. We check each connection first, rather than assume an old one suits a new tap or toilet.
Who lets the inspectors know?
In the ACT, the plumber tells Access Canberra when work starts, when it's ready to inspect and when it's done. In Bungendore and Braidwood, a Notice of Work goes to the council first.
Do you do renovations for businesses too?
Yes. We do project works for homes and commercial properties.
Do you come out to Bungendore and Braidwood?
Yes. We cover Canberra and about 100 km around it.
Are you licensed?
Yes. ACT 20241513 and NSW 498011C, and fully insured.
Tell us what's wrong. We'll take it from there.
Send us a few details and we'll take it from there.
- Call us0403 095 102
- Email usoffice@oroflowplumbing.com





