
Phones answered 7am to 5pm
Same drain blocked again? CCTV drain inspections show why.
We put a camera down the pipe, so you see the problem before anyone digs.
- Call back in 5 minutes
- Same day visits
- 10% off when you book online
- Rated 5.0 on Google
- Licensed in the ACT and NSW
- Homes, rentals and businesses
★★★★★
“Friendly … and respectful of making a worksite in your home”Sue M · Google review★★★★★
“Arrived on time … and left everything clean and tidy”Talia · Google review★★★★★
“Arrived when they said they would”Alessia · Google review★★★★★
“Quick to respond, efficient … reasonably priced”Christine · Google review
Still putting up with these?
Clearing it only buys you a few months.
We look inside to see what keeps blocking it.
Someone says you need a whole new drain.
We check the pipe first, so you know what it needs.
The sink, shower and toilet all play up at once.
We find the spot where the trouble starts.
Here's how it works.

Give us a call.
Call or send the form. Tell us which drains play up and how often.
Step 1: Give us a call.
When this service is useful
A camera inspection investigates internal pipe condition and helps locate faults. It is particularly useful when a blockage returns, several fixtures are affected or the cause is unclear. A camera is a diagnostic tool, not a repair, and it cannot guarantee a complete view through every obstruction.

We come to you.
We find the best way into the pipe for the camera.
Step 2: We come to you.
Access and visibility
Tell us about available access points and previous clearing. A blocked section may need clearing before it can be inspected. Ask which section could be viewed, what the findings indicate and what could not be confirmed. Do not assume an inspection includes a recording or report in a particular format; confirm the deliverables.
Reading the footage against Canberra’s sewer tie
In Canberra, where a camera finds a fault matters as much as what it finds. Icon Water looks after the public sewer, including the sewer tie, where a property’s pipes join its network along the lease boundary. That point is usually marked by a sewer riser, also called an inspection shaft. Everything on the private side of the tie is the owner’s to maintain, and Icon Water says that includes any root intrusion at the designated connection point. Before a camera goes in, look at the inspection shaft. Icon Water’s guide is simple: if the shaft is filling with water, the fault is likely in its network. If it is not, the fault is likely in the private plumbing.

We show you.
We walk you through what the camera finds and the choices from there.
Step 3: We show you.
Use findings to choose the next step
Visible defects need to be considered alongside symptoms and the location of the affected section. Ask whether clearing, targeted repair or replacement addresses the cause. If excavation is proposed, discuss fault location, access and reinstatement before approving work.
Matching camera findings to Bungendore and Braidwood pipes
A camera shows the inside of a pipe. A Sewer Service Diagram shows where the private sewer pipes run across the block. In Bungendore and Braidwood, Queanbeyan-Palerang Regional Council is the local plumbing regulator, and it may be able to supply an existing diagram for your property. Having one makes it easier to tie a defect on screen to a spot in the yard. Roots are the usual suspect in both towns. QPRC states that most sewer blockages and spills are caused by tree roots getting into sewer pipes. Its sewerage asset plan also reports that smoke testing has found significant areas of faulty customer connections letting water into the sewer system.

Easy payment.
We tell you how to pay before we start, so there's no awkward moment at the end.
What the camera looks for.

Where the fault is
The spot along the pipe where the trouble sits.
- Blocks that keep coming back
- Slow drains with no clear cause
- Where to dig, if digging is needed
- Access points checked first

Roots and damage
What's going on inside the pipe itself.
- Tree roots getting in
- Build-up inside the pipe
- Damaged sections
- Things stuck in the line

Your side or the street's
Which side of the boundary the fault is on.
- Canberra sewer tie checks
- Bungendore and Braidwood homes
- The pipe route across the block
- Next step: clear, repair or replace
Local plumbing help across Canberra and the region
Canberra, Bungendore, Braidwood and surrounding areas. Not sure? Call 0403 095 102.
Map data © OpenStreetMap contributors
Type your suburb and we'll tell you straight away.
Other services
Common questions
Straight answers to what people ask us most.
Can't see your question? Call 0403 095 102
Where does my sewer responsibility end in Canberra?
Icon Water says the border between its network and your sanitary system is usually at the property boundary, typically downstream of the last inspection opening. Where there is no inspection opening, the approved drainage plan sets it. The owner maintains everything up to that point, so a camera inspection helps show which side a fault sits on.
Can I find my Canberra drainage plan before an inspection?
Approved sanitary drainage plans belong to the ACT Government and can be found through Access Canberra’s plumbing tie search. If you plan to modify a residential sanitary drainage system, you need to buy the plan for the property. Access Canberra supplies the plan image within 48 hours of application and payment.
What happens if the camera shows the blockage is in Icon Water’s pipe?
If a licensed plumber finds the blockage is actually in Icon Water’s network, Icon Water will reimburse the plumber’s cost under its Rates for Reimbursement 2026-27. It will not reimburse if someone non-authorised removes or relieves a blockage on its side, or if unapproved household waste caused it.
Can you see every part of the pipe?
Not always. We see what we can reach from the access points, and we tell you what we couldn't check.
Do I get a recording of the inspection?
Ask us when you book. We confirm up front what you get from the inspection.
What if the drain is too blocked to see?
We clear it first, then send the camera through.
Can you inspect drains at a rental or a shop?
Yes. We work on homes, rental properties and commercial sites.
Do you come out to Bungendore and Braidwood?
Yes. We cover Canberra and about 100 km around it.
Are you licensed?
Yes. ACT 20241513 and NSW 498011C, and fully insured.
Tell us what's wrong. We'll take it from there.
Send us a few details and we'll take it from there.
- Call us0403 095 102
- Email usoffice@oroflowplumbing.com





