
Phones answered 7am to 5pm
Shower goes cold mid-rinse? Continuous-flow hot water systems.
We find out why the heat drops, then fit what suits your home.
- Call back in 5 minutes
- Same day visits
- 10% off when you book online
- Rated 5.0 on Google
- Licensed in the ACT and NSW
- Homes, rentals and businesses
★★★★★
“Friendly … and respectful of making a worksite in your home”Sue M · Google review★★★★★
“Arrived on time … and left everything clean and tidy”Talia · Google review★★★★★
“Arrived when they said they would”Alessia · Google review★★★★★
“Quick to respond, efficient … reasonably priced”Christine · Google review
Still putting up with these?
The water goes cold when two showers run.
We look at which taps you use together.
The hot water swings from hot to cold.
We check the unit and the pipes to it.
You want the big tank gone from the yard.
We check if a wall unit suits your home.
Here's how it works.

Give us a call.
Call or send the form. Tell us which taps you use at the same time.
Step 1: Give us a call.
When this service is useful
Oroflow’s original scope includes continuous-flow hot water systems. Suitability depends on the property, available connections and hot water demand.

We come to you.
We look at your unit, the pipes and how your home uses hot water.
Step 2: We come to you.
Match simultaneous demand
Explain which outlets are used together and whether the property has peak periods of demand. A system choice should consider those conditions and the actual installation requirements, not just the physical size of the unit.
Gas continuous flow and the ACT connection ban
A gas continuous-flow unit needs a gas supply, and in the ACT that supply is now limited. From 8 December 2023, new gas network connections are prevented in residential, commercial and community facility zones. The regulation sits under the Climate Change and Greenhouse Gas Reduction Act 2010 and restricts Evoenergy from providing new fossil fuel gas network connections. The change came through the Natural Gas Transition Amendment Act 2023, notified on 23 June 2023. For a continuous-flow job, the first question is whether the property has a gas meter now. If it has none, fitting one would be a new connection. If it has one, a licensed plumber can look at the existing supply and the unit it feeds.

We fit it.
We fit or service the unit and check the water at your taps.
Step 3: We fit it.
Supply, changeover and servicing
Ask what installation or replacement includes, what other trade work is needed and what remains to be checked on site. For temperature changes or loss of hot water, describe whether all outlets are affected. Do not remove covers or attempt internal adjustments.
Outlet temperature limits for instantaneous units
A continuous-flow unit heats water as it passes through, so the limit that matters is at the tap. The Plumbing Code of Australia caps heated water at each bathroom sanitary fixture at 50°C in most buildings, homes included. One accepted way to meet that is a water heater marked as temperature-limited to 50°C. A thermostatic mixing valve, thermostatic tap or tempering valve can also do it. Stricter rules apply in early childhood centres, schools used by children, aged care residential areas, health-care patient areas and designated accessible facilities. Those need delivery limited to 45°C with a thermostatic mixing valve or thermostatic tap. The Australian Building Codes Board cites research showing a scald takes 5 seconds at 60°C.

Easy payment.
We tell you how to pay before we start, so there's no awkward moment at the end.
Wall units, fitted and kept running.

New wall units
A continuous-flow unit fitted where it works.
- Homes and townhouses
- Sized to taps used at once
- Pipes connected
- Tested before we go

Tank to wall unit
Swapping a storage tank for a wall unit.
- Old tank taken away
- Connections checked first
- Space freed up
- Changeover planned

Servicing and faults
Keeping your wall unit heating as it should.
- No hot water
- Heat that comes and goes
- Error lights
- Regular servicing
Local plumbing help across Canberra and the region
Canberra, Bungendore, Braidwood and surrounding areas. Not sure? Call 0403 095 102.
Map data © OpenStreetMap contributors
Type your suburb and we'll tell you straight away.
Other services
Common questions
Straight answers to what people ask us most.
Can't see your question? Call 0403 095 102
Can I replace my gas continuous-flow unit if my Canberra home already has gas?
Homes that already have a gas meter installed can keep using their gas connection under the ACT rules. The ban targets new connections. If the gas service is ever abolished, for example during a renovation, it cannot be reconnected later.
Can a Sustainable Household Scheme loan pay for a continuous-flow system?
The ACT scheme names hot water heat pumps and evacuated tube solar hot water systems as its eligible hot water products. If the system you want is not one of those types, check eligibility directly with the scheme before you rely on a loan.
How cold does Canberra get for a unit mounted outside?
At Canberra Airport the mean minimum is 1.0°C in June, 0.1°C in July and 1.2°C in August (Bureau of Meteorology, 2008-2026). The long-running Canberra Airport Comparison station recorded a lowest temperature of -10.0°C. Ask your plumber how exposed pipework will be protected.
Will a wall unit keep up with two showers?
It depends on which taps run together and when. We check that before we suggest a unit.
Can I swap my tank for a continuous-flow unit?
It depends on your property, the connections you have and how much hot water you use at once. We check before we recommend it.
Do you service continuous-flow units?
Yes. We service them and find faults. When it goes cold, tell us if every tap is affected or just one.
How hot should the water be at the bathroom tap?
In most homes the limit at bathroom taps is 50°C. A unit set to 50°C or a mixing valve keeps it there.
Do you come out to Bungendore and Braidwood?
Yes. We cover Canberra and about 100 km around it.
Are you licensed?
Yes. ACT 20241513 and NSW 498011C, and fully insured.
Tell us what's wrong. We'll take it from there.
Send us a few details and we'll take it from there.
- Call us0403 095 102
- Email usoffice@oroflowplumbing.com





